Congratulations on your purchase of a Stewart changeable copy sign. With proper use, you can expect to enjoy your Stewart sign for many years into the future. For purchasing additional letters, letter changers, letter storage cases or word panels, visit our online store. You may also read our lifetime warranty.

On this page:
Frequently Asked Questions
Installation Information
Sign Specifications
Maintenance
Using your Sign

1. Header Panel
2. Logo Panel
3. Message Center
4. Riveted Tracking
5. Changeable Copy Letters
6. Draft
7. Divider Bars
8. Cabinet
9. Decorative Trim
10. Flourescent Lamps
11. Cowling
12. Legs
13. Baseplate
14. Internal Support
15. Horizontal Support
16. Anchor Bolts
17. Rebar
18. Electrical Conduit
19. Concrete Footer

Is there an Owner's Manual for my sign?
Yes! Click here to download it. (Requires Acrobat Reader)

Where is the vandal cover key located when the sign is shipped to me?
Your vandal cover key is affixed to the vandal cover arm. (Click here for image)

How do I open the sign and change my letters?
Click here to learn more on opening your sign.

How do I change the bulbs inside the sign?
Click here to learn more on changing your bulbs.

How do I order additional letters or word panels?
To order by credit card, visit our online store at Resources4Signs.com
To order by check or money order, print and mail in one of the following order forms:
Changeable Copy Letter Order Form | Word Panel Order Form (Requires Acrobat Reader)

1. Remove the protective plastic immediately as it is only meant to protect your sign during transit. If left in the heat, this film can permanently melt onto your sign.

2. Remove the blue tape around the vandal cover.

Installation Video
Instructional video on installing a typical Stewart Sign. (Requires Windows Media Player)

Basic Installation Instructions
Printable instructions on installing a typical Stewart Sign. (Requires Acrobat Reader)

Masonry Mounted Installation Instructions
Printable instructions on installing a masonry mounted Stewart Sign. (Requires Acrobat Reader)

Wall Mounted Installation Instructions
Printable instructions on installing a wall mounted Stewart Sign. (Requires Acrobat Reader)

Please call a customer service representative at 1-800-237-3928 for the exact electrical specifications of your sign.

Maintenance Procedures
Instructions on several maintenance procedures including:

Adding cowling

Adjusting lamp brightness

Applying vinyl letters

Cleaning your sign

Changing bulbs

Changing tracking

Decorative trim replacement

Installing boots on lamp sockets

Installing quarter turn locks

Installing vandal covers

Matte finish removal

Replacing a ballast

Waxing your sign

(Requires Acrobat Reader)

Opening Your Sign
Instructions on how to open the vandal cover and change the letters.

Changing Your Message
Use this utility to determine how many letters you will need to add or remove to change your existing message.

Letters Per Row
A list of approximate number of letters per row that can fit into your sign model. (Requires Acrobat Reader)