Congratulations on your purchase of a Stewart identification sign. With proper use, you can expect to enjoy your Stewart sign for many years into the future. Read our lifetime warranty for Identification Signs.

On this page:
Installation Information
Sign Specifications
Maintenance

Remove the protective plastic immediately as it is only meant to protect your sign during transit. If left in the heat, this film can permanently melt onto your sign.

Installation Video
Instructional video on installing a typical Stewart Sign. (Requires Windows Media Player)

Basic Installation Instructions
Printable instructions on installing a typical Stewart Sign. (Requires Acrobat Reader)

Masonry Mounted Installation Instructions
Printable instructions on installing a masonry mounted Stewart Sign. (Requires Acrobat Reader)

Wall Mounted Installation Instructions
Printable instructions on installing a wall mounted Stewart Sign. (Requires Acrobat Reader)

Architectural Letters Installation Instructions
Printable instructions on installing architectural letters. (Requires Acrobat Reader)

Cornerstone Installation Instructions
Printable instructions on installing Cornerstone signs. (Requires Acrobat Reader)

Installation Animation
With Sound | Without Sound

Please call a customer service representative at 1-800-237-3928 for the exact electrical specifications of your sign.

Maintenance Procedures
Instructions on several maintenance procedures including:

• Adding cowling
• Adjusting lamp brightness
• Applying vinyl letters
• Cleaning your sign
• Changing bulbs
• Decorative trim replacement
• Installing boots on lamp sockets
• Installing quarter turn locks
• Matte finish removal
• Replacing a ballast
• Waxing your sign

(Requires Acrobat Reader)