Enhanced Logo Area Signs

Display your symbol, logo or other graphics alongside your changeable letter message with our Enhanced Logo Area signs. A separate logo area delivers a greater graphic impact, leaving more space for your organization’s name up top and the opportunity for a larger logo below.

Each sign comes standard with a locking vandal cover made of the same graffiti- and UV-resistant Makrolon SL® polycarbonate found on our sign faces. These vandal-resistant covers prevent the theft of letters and their rearrangement into unwanted messages while protecting your sign from the elements.

Read more below or contact us for more information.

  • Separate area for additional sign graphics
  • Locking vandal cover made from Makrolon SL® opens a full 90°
  • Glide & Lock© support system keeps open vandal cover safely in place
  • Full complement of letters, numbers and punctuation included
  • Lifetime warranty
  • UL Listed

Enhanced Logo Area

A locking vandal cover, silkscreened letters and durable riveted tracking are included with every changeable letter sign.

Locking Vandal Cover
Unfortunately, the stealing of letters or their rearrangement into inappropriate messages is a very real concern for today’s sign owner. The embarrassment and added expense incurred because of vandals can limit the effectiveness and enjoyment of your new sign. Stewart’s vandal cover gives you the peace of mind of knowing that your message will be displayed as intended until you—and only you—are ready to change it.


Hinged at the top with locks across the bottom, the cover opens and stays open at 90 degrees, allowing you to change your message easily and safely. Instead of gas struts, which typically fail with repeated use, Stewart signs use our proprietary Glide & Lock© system (where applicable) to hold the vandal cover in place. Better yet, these specialized prop arms are built to last the lifetime of your changeable letter sign.

The vandal cover is made from the same graffiti- and vandal-resistant Makrolon SL® polycarbonate as your sign’s face. Makrolon SL’s built-in UV protection prevents the yellowing and cracking commonly seen with standard polycarbonate and Plexiglas® covers. And unlike sealed vandal cover systems, Stewart’s vandal cover allows air to circulate at strategic points along your sign’s letter tracking. This prevents condensation, mildew and mold from building up on the cover and impairing the readability of your message.

features_changeable_letters2Included Letters & Storage Case
Every Stewart changeable letter sign comes with a full set of letters, numbers and punctuation plus a storage case. All characters are injection-molded and silkscreened in black.

Designed expressly for changeable letter signs, our proprietary Stewart font is optimized for both readability and maximum message length. As an added bonus, we’ll provide you with 30 more free letters of your choice once you’ve received and used your sign!

features_changeable_rivetsRiveted Letter Tracking
Unlike the tracking on other institutional signage, Stewart’s letter tracking isn’t glued onto the sign face. Why? Glues and other adhesives often fail or discolor with repeated exposure to sunlight.

Instead, our tracking is attached to our signs using white metal rivets, giving you a clean, professional look that lasts. White rivets blend well with white tracking and will not be seen from a distance.

Unsure of how big your sign should be? Compare available sizes using our scale diagrams.

Leg height is customizable.
All measurements shown are approximate; final product dimensions may vary.


Browse changeable letter sizes and for your sign and decide between an attached or removable logo panel.

Logo Area Options
Choose from two configurations:

  • Identification header with removable, sectional logo panel
  •  Identification header with attached logo panel


Changeable Letter Sizes
Available letter sizes are listed below, along with size recommendations based on traffic speed.
Letter capacity per row is approximate; actual capacity will vary based on letters and spaces used.

Cabinet Size
Letter Size &
Traffic Speed
3’9″x8′ 4’x8′ 5’x8′ 5’x10′ 6’x12′
4″ Letters
Up to 30mph
4 rows
25 letters/row
4 rows
25 letters/row
5 rows
25 letters/row
5 rows
31 letters/row
6″ Letters
Up to 45mph
3 rows
17 letters/row
3 rows
17 letters/row
4 rows
17 letters/row
4 rows
21 letters/row
5 rows
26 letters/row
8″ Letters
Up to 55mph
—– —– 3 rows
14 letters/row
3 rows
17 letters/row
4 rows
21 letters/row
10″ Letters
Up to 70mph
—– —– —– —– 3 rows
16 letters/row

Explore the many trim, mounting and custom panel choices we offer to make your sign really stand out.

Trim Options


Mounting Options
Mounting options range from freestanding to wall- and masonry-mounted signs. Our most popular mount, the Pedestal, gives your sign a more substantial and professional look. Mountings and leg heights are also customizable. Speak with a Stewart representative for more information.


options_changeable_panelsWord Panels
For a seamless, streamlined look, Stewart can create custom word panels that slide into the letter tracking of your sign. Post names, times and regular events on a single durable piece that can be easily added, moved or removed as needed. Available as single or double lines of text, word panels can be as wide as your changeable letter area—or less, if desired. Our word panels are made of the same material as our changeable letters and feature silkscreened black text.

Want even more customization?
Make your message really pop with our array of graphics and color options.

For more information about our products and our company, visit Why Choose Stewart Signs?

Ready to get started?

To receive a catalog, pricing information and a FREE artist rendering
of a sign designed for your needs, just request a Quick Quote!
Quick Quote

We use cookies to give you a better experience on our sites. To learn more about how we use cookies, please read our privacy policy.